Sony Cyber-Shot DSC-P9 Operating Instructions Manual page 89

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\14trb.fm]
01cov.book Page 89 Tuesday, February 18, 2003 3:07 PM
Symptom Cause
The image is too bright. • You are shooting a spot lighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too high.
Vertical streaks appear • The smear phenomenon is occurring.
when you are shooting a
very bright subject.
When looking at the LCD • The camera temporarily brightens the LCD
screen in a dark place,
screen to allow you to check the image being
some noise may show up
displayed while you are using the camera in a
on the screen. dark place.
You cannot shoot images. • No "Memory Stick" is inserted.
• The capacity of the "Memory Stick" is
insufficient.
• The write-protect switch on the "Memory Stick"
is set to the LOCK position.
• You cannot shoot while the flash is charging.
• The mode selector is not set to
want to shoot a still image.
• The mode selector is not set to
want to shoot a movie.
The macro mode does not
• When shooting still images,
function. to
Cannot shoot images with • The mode selector is set to
the flash. • The flash is set to
• When shooting still images,
to
• [Moving Image] is not set to [Clip Motion] in the
SET UP settings.
The eyes of the subject —
come out red.
The date and time are • The date and time are not set correctly.
recorded incorrectly.
when you
when you
(Camera) is set
or .
or SET UP.
(No flash).
(Camera) is set
.
masterpage:L1adv-Right-04
Solution
p Adjust the exposure (page 46).
p Adjust the brightness of the LCD screen (page 103).
p This is not a malfunction.
p This will have no effect on the image you shoot.
p Insert a "Memory Stick" (page 19).
p Delete the images saved in the "Memory Stick," or format it.
p Change the "Memory Stick."
p Set it to the recording position (page 105).
—
p Set the mode selector to
(page 22).
p Set the mode selector to (page 68).
p Cancel the mode (page 54).
p Set it to a setting other than , or SET UP (page 28).
p Set the flash to "Auto" (No indicator), (Forced flash), or
(Slow synchro) (page 28).
p Cancel the mode (page 54).
p Set it to [Clip Motion] (page 102).
p Set [Red Eye Reduction] to [On] (page 29).
p Set the correct date and time (pages 17, 103).
89
model name1[DSC-P92]
[3-082-719-11(1)]