Sony Cyber-Shot DSC-P9 Operating Instructions Manual page 93

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\14trb.fm]
01cov.book Page 93 Tuesday, February 18, 2003 3:07 PM
Symptom Cause
You cannot format a • The write-protect switch on the "Memory Stick"
"Memory Stick." is set to the LOCK position.
You have formatted a
• All the data on the "Memory Stick" are erased by
"Memory Stick" by formatting.
mistake.
Others
Symptom Cause
The camera does not • The battery level is low or zero (The
work, no operations can indicator appears.).
be performed. • The AC Adaptor (not supplied) is not connected
securely.
The power is on, but the • The internal system is not working properly.
camera does not work.
You cannot identify the —
indicator on the LCD
screen.
The lens gets fogged. • Condensation is occurring.
The camera gets hot if you —
use it for a long time.
The lens does not move
• The batteries are discharged.
when you turn off the
camera.
masterpage:L1adv-Right-04
Solution
p Set it to the recording position (page 105).
p We recommend that you set the "Memory Stick" write-protect
switch to the LOCK position to protect accidental erasure
(page 105).
Solution
p Charge the batteries (page 10).
p Connect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 15).
p Remove, and then, after one minute, reinstall the batteries and
turn on the camera. If this does not work, press the RESET
button located inside the jack cover with a pointed object, then
turn the power on again. (This will clear the date and time
settings, etc.)
p Check the indicator (pages 109 to 111).
p Turn off the camera, leave the camera for about an hour and then
try to use it again (page 104).
p This is not a malfunction.
p Replace them with charged batteries or use the AC Adaptor (not
supplied) (pages 10, 12, 15).
93
model name1[DSC-P92]
[3-082-719-11(1)]