U631 Setting Communication Control; Setting Ecm Transmission; Setting Ecm Reception; Setting The Frequency Of The Ced Signal - Kyocera FaxSystem(M) Service Manual

3KH-2
Maintenance
item No.
Setting communication control 2
U631
Description
Makes settings regarding fax transmission.
Start
1. Press the start key.
2. Select the item to be set. The screen for the selected item appears.
Display
ECM TX
ECM RX
CED FREQ.
The screen changes to the submenu for making settings.
The port that is addressed by U698 is displayed when the optional dual FAX is installed.
The current settings are highlighted. If the optional dual FAX has been installed and if U698 is set to
[ALL] and settings for ports 1 and 2 are not identical, the display is not highlighted.

Setting ECM transmission

To be set to OFF when reduction of transmission costs is of higher priority than image quality.
This should not be set to OFF when connecting to the IP (Internet Protocol) telephone line.
1. Select the setting.
Display
ON
OFF
2. Press the start key. The setting is set.

Setting ECM reception

To be set to OFF when reduction of transmission costs is of higher priority than image quality.
This should not be set to OFF when connecting to the IP (Internet Protocol) telephone line.
1. Select the setting.
Display
ON
OFF
2. Press the start key. The setting is set.

Setting the frequency of the CED signal

Sets the frequency of the CED signal. Used as one of the measures to improve transmission performance for
international communications.
1. Select the setting.
Display
2100
1100
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-14
Description
Description
Sets ECM transmission.
Sets ECM reception.
Sets the frequency of the CED signal.
Description
ECM transmission is enabled.
ECM transmission is disabled.
Description
ECM reception is enabled.
ECM reception is disabled.
Description
2100 Hz
1100 Hz