Toshiba e-studio222cs User Manual page 158

ITEM OPTION
Print Setup EPSON FX
(cont.) Setup (cont.)
Network Network Setup
Menu
Text Height
TCP/IP
IP Version
NetBEUI
NetBIOS Over TCP
NetWare
EtherTalk
Frame Type
IP Address Set
IPv4 Address
Subnet Mask
Appendix A - menu system > 158
DEFAULT VALUE/DESCRIPTION
Same Sets the height of a
character.
SAME: Regardless of
CPI, same height
DIFF: As CPI,
character heights
vary.
Enable Enables or disables
this network protocol.
IPv4 Set up the IP version.
Display condition:
TCP/IP protocol must
be enabled.
Disable Enables or disables
this network protocol.
Enable
Enables or disables
this network protocol.
Display condition:
TCP/IP protocol must
be enabled.
Disable Enables or disables
this network protocol.
Disable Enables or disables
this network protocol.
Auto Selects the Ethernet
MAC layer frame type.
Display condition:
Netware must be
enabled.
Auto Specifies whether IP
address allocation is
automatic (DHCP) or
manually assigned.
Display condition:
TCP/IP protocol must
be enabled.
xxx.xxx.xxx.xxx
Current assigned IP
address.
To change, enter the
address using the
numerical keypad.
Press Enter to
register new address.
Display condition:
TCP/IP protocol must
be enabled.
xxx.xxx.xxx.xxx Current assigned
subnet mask. To
change, proceed as
above.
Display condition:
TCP/IP protocol must
be enabled.