Toshiba e-studio222cs User Manual page 153

ITEM OPTION
Print Setup Color Menu
(cont.) (cont.)
System
Configuration
Menu
Adjust Registration
Cyan Reg Fine Adj
Magenta Reg Fine Adj
Yellow Reg Fine Adj
Ink Simulation
UCR
CMY100% Density
CMYK Conversion
Personality
Appendix A - menu system > 153
DEFAULT VALUE/DESCRIPTION
Execute Performs automatic
colour registration
adjustment. Normally
this is done on power
on and when the top
cover is opened and
then closed. This
process accurately
aligns the cyan,
magenta and yellow
images to the black
image.
0 Performs fine
adjustment of image
0
timing in relation to
the black image
0
component.
OFF Selects from a range
of industry standard
colour swatches.
Low Selects the limitation
of the toner layer
thickness.
If paper curl occurs in
dark printing,
selecting Medium or
Low sometimes helps
reduce curl.
Disable When enabled, black
areas are produced
using 100% C, M, and
Y instead of black.
This results in a
glossier finish.
ON Setting to OFF will
simplify the
conversion process of
CMYK data, which will
reduce process time.
This setting is ignored
when Ink Simulation
function is used.
Auto Emulation This item selects
which industry
standard emulation
your MFP should use.
When set to Auto,
incoming data is
examined and the
correct emulation is
automatically selected
each time a print job
is received.