Toshiba e-studio222cs User Manual page 147

ITEM OPTION
Other Settings
a
Fax Setup
(cont.)
Redial Tries
Redial Interval
Forced Memory Rx
Setting
I.D.Code
Block Junk Fax
Setting
Registered List
Ring Response
Dialling Pause Duration
Rx Reduc. Rate
Reduc. Margin
ECM Mode
Prefix
Received Time Stamp
Print Check Message
Appendix A - menu system > 147
DEFAULT VALUE/DESCRIPTION
2 time(s) Set the number of
redial attempts.
Range: 0 - 10 time(s)
1 minute(s) Set the time between
redial attempts.
Range: 0 - 5
minute(s)
OFF
user defined
Can prevent
unnecessary fax
OFF
reception.
select from list
1 Ring Enter the number of
rings required before
receiving an incoming
fax.
2 second(s) Enter the pause
duration required.
Range: 0 - 10
second(s)
Auto Select the Rx
reduction rate.
24 mm Select the reduction
margin.
Range: 1 - 100 mm
ON Error correction mode
(ECM) automatically
detects and corrects
errors in the fax
transmission process
that are sometimes
caused by telephone
line noise.
user defined Enter the require
dialing prefix (if you
are connected via a
PBX then you need to
enter a prefix to
obtain an outside line
connection).
OFF Set to ON if you want
the time stamp
printed on incoming
faxes.
ON If enabled, when a
transmission error
occurs the error
content is reported.