Chevrolet 2010 Avalanche Owner's Manual page 498

Removing the Flat Tire and Installing
the Spare Tire
Use the following pictures and instructions to remove
the flat tire and raise the vehicle.
The tools needed are the jack (A), the wheel blocks (B),
the jack handle (C), the jack handle extensions (D), and
the wheel wrench (E).
1. Do a safety check before proceeding. See
Changing a Flat Tire on page 6 78 for more
information.
6-84
If the vehicle has a bolt-on hub cap, loosen the
plastic nut caps by turning the wheel wrench
counterclockwise. The plastic nut caps will be
retained in the hub cap after it is removed from
the wheel.
I n f o r ma t i o n P r o v i d e d b y :
2. If the vehicle has a
center cap, place the
chiseled end of the
wheel wrench in the
slot on the wheel and
gently pry the cap out.