Table of Contents
Advertisement
A. Wheel Blocks
B. Jack Knob
C. Wing Nut
6-80
D. Retaining Hook
E. Jack
F. Mounting Bracket
2. Release the jack (E) from the mounting bracket (F)
by turning the jack knob (B) on the jack
counterclockwise to release the jack from the
mounting bracket.
3. Remove the wheel blocks (A) attached to the
jack (E) by turning the wing nut (C)
counterclockwise. Place the wheel blocks where
needed as indicated in previously in this section.
The tools for changing a flat tire are located in the
passenger's side top-box storage unit.
To remove the tools, do the following:
1. Open the top door on the passenger's side top-box
storage unit. Use the ignition/door key to unlock it if
it is locked. See Top-Box Storage on page 3 91
for more information.
2. Remove the black pouch from the storage box.
You now have all of the tools you will need to lower
the spare tire and change a flat.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Chapters
Table of Contents
