Printer Options - Datamax I-Class Mark II Operator's Manual

Printer Options

The Printer Options menu contains file-handling, module, and optional equipment settings:
Modules

Present Sensor

Cutter

GPIO Port

The menu selections are defined as follows:
DISPLAYED ITEM
MODULES
DIRECTORY
PRINT FILE
FORMAT
MODULE
DELETE FILE
COPY FILE
UNPROTECT
MODULE
PRESENT SENSOR
MODE
AUTO
ENABLED
DISABLED
RETRACT DELAY
(1 - 255 x 10 mS)
070
Chapter 4 – Menu System
Controls memory handling functions, where:
Allows viewing and printing of the available space and file types (including plug-in
files) present on a module. Only detected modules will be listed, and selecting ALL
will display all results. (See the Programmer's Manual for memory allocation
information.)
Prints selections from stored file
File Extension
DBM A font sample.
DCM The configuration commands contained in the file.
DIM The image.
DLB The stored label.
DLN The name of the language.
DMS The database contained in the file for RFID.
DPL A label format, if detected.
DTT A font sample.
PLU The names of the files contained in the plug-in directory.
PRN Is processed as a DPL file.
TXT Is processed as a DPL file.
Selects from a list of modules available for formatting by the printer. Choosing
FORMAT MODULE will erase existing data in the selected module
Selects from the list of available files for deleting; see Section 6.3, File Handling
Messages.
Selects from the list of available files for copying, prompting you for the
destination module before execution.
Selects from the list of available modules to unprotect, and then prompting you
regarding the outcome of the attempt.
Controls the "on-demand" dispensing of labels , where:
Sets the detection method and response of the printer:
Is the default setting. Automatically detects, enables the Present Sensor (or Peel
and Present mechanism) and sets the label stop location; if not detected, the
operation will be ignored.
Enables the Present Sensor (or Peel and Present mechanism) and sets the label
stop location; if not detected, a fault will be generated.
Disables the option.
Programs a time delay for the retraction of the next label in the print process,
where:
Is the range, times 10 milliseconds; and,
Seventy (times ten) is the default setting.
ITEM DESCRIPTION
types:
Printed Result
40