Windows Driver; Installing The Windows Driver - Datamax I-Class Mark II Operator's Manual

3 . 2 W i n d o w s
3 . 2 W i n d o w s
3 . 2 W i n d o w s
The Windows driver is located on the Accessories CD-Rom included with your printer. For the latest
version please visit our web site at www.datamax-oneil.com.

Be sure your printer's firmware version is 10.03_0016B or greater. Firmware is available from our
website, for the latest version please visit our web site at

Be sure your printer's USB Mode is set to "Printer". This mode can be viewed/changed via the
printer's front panel menu under: Communications> USB Port> USB Device Class.

Installing the Windows Driver:

Place the Accessories CD-Rom included with
your printer into your computers CD-Rom drive.
Once the CD-Rom starts select "Install Windows
Driver" from the main menu and follow the
instructions on the screen to install.
When prompted, select your printer from the
list, (i.e. Datamax-O'Neil I-Class MarkII).
Continue to follow the on-screen instructions to
install the driver.
Chapter 3 - Printer Operation
D r i v e r
D r i v e r
D r i v e r
http://www.datamax-oneil.com
17