Tools Required; Step 1: Preparing The Printer - Datamax H-Class Manual

Overview
This document describes the contents, installation, and use of the Heavy Duty Peel and Present option
for the H-Class printer. After verifying the contents of the kit and the tools needed, follow the steps below
to install and begin using the option. A maintenance procedure is also included, so keep this
documentation for future reference.
For your safety and to avoid equipment damage, always turn 'Off' power and unplug the
printer's power cord before beginning this installation and when performing service.
CAUTION
Contents of the Heavy Duty Peel and Present Option
This kit contains the following item:

Heavy Duty Peel and Present Assembly

Tools Required

To install this option, you will need a standard screwdriver.

Step 1: Preparing the Printer

A) Turn 'Off' the Power Switch and unplug the
power cord from the AC Receptacle.
1
Power Switch
AC Receptacle