Direct Access Tuning; Preset Station Seek With Programme Service Name - Kenwood KDC-PS909 Instruction Manual

Function of remote control with number/letter entry buttons

Direct Access Tuning

When you already know the frequency of the station that you
want to listen to, you can enter it directly for quick access.
1
Select the band by pressing the FM or AM button.
2
Press the DIRECT button.
The frequency part of the display blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically cancelled.
3
Enter the frequency of the desired station whilst the display is
blinking.
If you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
NOTE
• When a frequency which cannot be received is input, this
frequency is not verified and operation returns to the original
frequency input mode.
• FM frequencies can only be input in 0.1 MHz steps, and not in
0.01 steps.
Cancelling Direct Access Tuning:
Press the DIRECT button again.
(KCA-R6A : Optional)

Preset station seek with Programme service name

You can search for the preset station with Programme Service
name.
1
NOTE
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Cancelling mode during input:
— 15 —
Function of remote control with DNPP button
Press the DNPP button on the remote control.
"SNP PLAY" will be displayed once the seek mode is entered.
The names of the stations preset in the band currently listened
to are displayed for 5 seconds each.
The display band switches in the following order:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the TUNE
switches in the forward direction.
Each time you press the TUNE
switches in the reverse direction.
Stations which have no names will be displayed as
frequencies.
Changing the Displayed Band
Once the name is displayed for the station you want to listen
to
Press the OK button.
Reception starts of the displayed station, and the seek mode
ends.
Press the DNPP button.
The seek mode is cancelled.
(KCA-R6A : Optional)
+
button, the station display
–
button, the station display