Basic Operations Of Steering Remote Control - Kenwood KDC-PS909 Instruction Manual

Cd tuner
Hide thumbs Also See for KDC-PS909:
Table of Contents

Advertisement

Basic operations of steering remote control

2WARNING
To prevent accidents, do not attempt to use the steering remote
control whilst turning the steering wheel.
Replacing the Lithium Battery:
Use one lithium battery (CR2025).
Insert the battery with the
poles aligned properly, following
the illustration.
2WARNING
Store unused lithium batteries out of the reach of children.
Contact a doctor immediately if the battery is accidentally
swallowed.
All Modes
• SRC button
Each time you press the SRC button, the mode switches as
follows:
Tuner mode
CD mode
Disc control mode
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The disc control mode will differ depending on the unit that is
connected.
• VOLUME buttons
Press the 5 button to turn the volume up.
Press the ∞ button to turn the volume down.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning down the volume
all the way also cancels attenuation.
+
and
(See page 8)
Tuner Mode
• TUNE buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• FM button
Selects and switches between the FM1, FM2 and FM3 bands.
• AM button
Selects the AM band.
Disc Control Mode
• DISC buttons
Press the AM/DISC
backwards.
Press the FM/DISC
forwards.
• TRACK buttons
Press the 4 button to search through the tracks backwards.
Press the ¢ button to search through the tracks forwards.
— 31 —
button to search through the discs
+
button to search through the discs

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents