Switching Modes; Volume; Loudness; Attenuator - Kenwood KDC-PS909 Instruction Manual

Basic operations
(See page 6)

Switching Modes

Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
Tuner mode
CD mode
Disc control mode
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The disc control mode will differ depending on the unit that is
connected.

Volume

Increasing Volume:
Press the u button to turn up the volume.
Decreasing Volume:
Press the d button to turn down the volume.

Loudness

This function amplifies low and high tones when the volume
is turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.

Attenuator

This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
NOTE
Turning down the volume all the way turns off the attenuator
function.

Attenuator Gain Selection

The attenuator gain can be switched to either -20 dB or -60 dB.
Choose the -60dB setting when using a high-output amplifier.
The factory default is -20dB.
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the monaural reception
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "ATT LOW" or "ATT HIGH"
in the display, indicating that the current setting is low or high,
respectively.
When "ATT LOW" is displayed, the attenuator gain is set at
-20dB. When "ATT HIGH" is displayed, it is set at -60dB.
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
— 10 —