Clean Reception System Circuit (Crsc); Switching Display For Tuner - Kenwood KDC-PS909 Instruction Manual

Clean Reception System Circuit (CRSC)

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Turning CRSC On/Off:
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2 Press the ¢ button repeatedly until the Clean Reception
System Circuit function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "CRSC ON" or "CRSC OFF"
in the display, indicating that the CRSC is on or off,
respectively.
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
NOTE
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.

Switching Display for Tuner

You can change the display used when listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as
follows:
Station frequency
Programme Service name (during RBDS station reception) /
SNPS name (only when being preset)
Radio text (only during RBDS station reception)
Clock
NOTE
• When receiving an RBDS station to which a name has been
preset with Station Name Preset, switching to the programme
service name/SNPS name display will result in the programme
service name being displayed with priority.
• Only when the Switching Clock display function (P.28) is on, the
clock is displayed.
• The £ indicator lights whilst the clock is displayed.
— 13 —