Station Preset M Emory; Auto M Emory Entry; Preset Tuning; Crsc (Clean Reception System Circuit) - Kenwood KRC-235 Instruction Manual

St at ion Preset M em ory
Putting the station in the m em ory.
1
Select the band
Press the [FM ] or [AM ] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
A ut o M em ory Ent ry
Putting stations w ith good reception in the m em ory
autom atically.
1
Select the band for Auto M emory Entry
Press the [FM ] or [AM ] button.
2
Open Auto M emory Entry
Press the [AM E] button for at least 2 seconds.
When 6 stations that can be received are put in the memory.
Auto M emory Entry closes.

Preset Tuning

Calling up the stations in the m em ory.
1
Select the band
Press the [FM ] or [AM ] button.
2
Call up the station
Press the [#1] — [#6] button.
CRSC (Clean Recept ion Syst em Circuit )
Tem porarily have reception sw itched from stereo to m ono to
reduce m ulti-path noise w hen listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, the "
— 9 —
"(CRSC) indicator is ON.