Installing Battery Cabinets; Two Models Are Available; Important Safety Instructions - Powerware 9315 Installation Manual

This chapter describes installing the UPS manufacturer's battery cabinets.
If you are installing battery cabinets and remote disconnects provided by Powerware
Corporation, refer to the Powerware 9315 Series 685 and 1085 Auxiliary Battery
Cabinets Installation Manual, 164200300, for instructions.

Two Models are Available

·
Series 685 (685 mm wide cabinet)
·
Series 1085 (1085 mm wide cabinet)

Important Safety Instructions

The installation of battery cabinets should be performed or supervised by
personnel knowledgeable of batteries and their associated precautions. Keep
unauthorized personnel away from battery cabinets.
Observe these precautions when working on or around battery cabinets:
·
Remove watches, rings, or other metal objects.
·
Use tools with insulated handles.
·
Wear rubber gloves and boots.
·
Do not lay tools or metal parts on top of batteries or battery cabinets.
·
Disconnect the charging source prior to connecting or disconnecting terminals.
·
Determine if the battery is inadvertently grounded. If it is, remove the source of
the ground. Contact with any part of a grounded battery can result in electrical
shock. The likelihood of such shock will be reduced if such grounds are
removed during installation and maintenance.
·
When replacing batteries, use the same number of sealed, lead-acid batteries.
·
Proper disposal of batteries is required. Refer to your local codes for disposal
requirements.
WARNING:
Do not dispose of battery or batteries in a fire. The battery may explode.
Do not open or mutilate the battery or batteries. Released electrolyte is harmful to
the skin and eyes, and may be toxic.
A battery can cause electrical shock, burn from high short-circuit current, or fire.
Take proper precautions when working with batteries.
Powerware 9315 (100 kVA- -160 kVA) Installation
164200292 Rev. E 041500

Installing Battery Cabinets

27