Figure 17. Typical Pdm Cabinet - Powerware 9315 Installation Manual

Installing a Power Distribution Module
The Power Distribution Module (PDM) cabinet contains one or two interface
panels, each containing 42 poles for breaker switches you can assign to meet
the needs of your facility. Each panel is controlled by one 225 amp feeder breaker.
The PDM cabinet arrives as shown in Figure 17 and Drawing 164200253---7 in
Appendix A. Before installing the PDM, be sure you have prepared the UPS
according to the instructions in Chapter 3. Refer to Powerware Power Distribution
Module Installation and Operation Manual 164201061 for PDM installation and
operation.
NOTE: This option requires an UPS with a 208 VACoutput.
Powerware 9315 (100 kVA- -160 kVA) Installation
164200292 Rev. E 041500

Figure 17. Typical PDM Cabinet

33