Night Owl FS-8320 Instruction Manual page 27

STATIC IP
1. Select STATIC as the network TYPE.
2. Setup PORT and WEB PORT (recommended to
leave these at the default values).
3. Enter the IP Address that you have reserved at the
beginning of this section into this field to be the
unique address of your DVR in your local network.
4. NETMASK: It is recommended to leave the Subnet
mask as the default 255.255.255.0.
5. Set the GATEWAY to the IP Address of your router.
6. Enter the DNS (Domain Name Server) Address,
leave this at its default value 0.0.0.0 if you are only
accessing your DVR in your internal network.
7. Click "APPLY" to save your change.
PPPoE
1. If your ISP provides you a Static IP Address, select
STATIC as the network TYPE.
2. Setup PORT and WEB PORT (recommended to
leave these at the default values).
3. Enter your PPPoE NAME and PASSWORD so your
DVR will be able to obtain service from your ISP.
4. Enter the DNS (Domain Name Server) address.
5. You will need to apply for a Dynamic DNS account
and register a Domain Name with one of the known
DDNS provider. Enter your DDNS Provider's
HOST NAME, USERNAME, and PASSWORD in
the DDNS SETUP page.
25
User's Manual