Network Setup - Global Access (Connected Directly To Modem) - Night Owl FS-8320 Instruction Manual

5.2.10 Network Setup – Global Access (Connected Directly to Modem)
To access the NETWORK SETUP menu, select "MAIN MENU" " "ADVANCE" "
"NETWORK" to open the NETWORK SETUP menu.
If you would like to access your DVR while you are outside of your home, please follow the
instructions below to configure the NETWORK Setup page of your DVR
Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that
you perform the following tasks:
1. Find out from your Internet Service Provider (ISP) what kind of service you are using.
Note: Your DVR supports these three common types of Internet Services: DHCP (Cable
Modem), PPPoE (DSL Modem) and Static IP (Fiber Optics). Actual service type may vary,
please ask your ISP for the exact service type.
2. Write down the: IP Address provided by your ISP (if your ISP is using Static IP), Subnet
Mask, Gateway Address, DNS Address(es) provided by your ISP of your DVR for future
reference when configuring the DVR.
DHCP
1. If your ISP uses DHCP networking, select DHCP
network TYPE.
2. Setup PORT and WEB PORT (recommended to
leave these at the default values).
3. Click the "DDNS SETUP" Button.
4. You will need to apply for a Dynamic DNS account
and register a Domain Name with one of the known
DDNS provider. Enter your DDNS Provider's
HOST NAME, USERNAME, and PASSWORD in
the DDNS SETUP page.
NOTE: If you would like a free DNS account please visit
www.DynDNS.org
24
User's Manual