Using The Program Function - Akai AMD20 User Manual

i
● Normally, if an MP3 disc is loaded, the unit will take longer time to read
the initial data.
● A DVD that does not match the region code cannot be read by this
appliance.
● If a disc contains mixed content (e.g. MP3 and video files), the appliance
will only recognise, list and play one content type.
● The screen saver becomes active if no disc has been loaded for
3 minutes, or if the appliance has been in STOP mode for 3 minutes.
Using the GO TO function
The GO TO function can be used to select a specific starting point on a DVD
or CD.
● Press the GO TO button (28).
● Press the arrow buttons to select an entry.
The possible entries for DVD are:
- Disc time
- Chapter
- Title
- Chapter time
- Title time
The possible entries for CD are:
- Track time
- Specific track
● Press the digit buttons to set a selection.

Using the PROGRAM function

● Press the PROG button (30) to enter the PROGRAM function.
● Press the digit buttons to select a desired track, and use the arrow button
down to highlight the next entry.
● To confirm the selection and start the program, move the highlight to
"START" and press the ENTER button.
● To stop the progam, press the PROG button (30) and press ENTER.
Using the A-B REPEAT function
The A-B REPEAT function can be used to repeat a specific section of a DVD.
● Press the A-B REPEAT button (36) once to select the starting point (A).
16