Dvd/Cd Functions - Akai AMD20 User Manual

● Select the DVD mode. Then select the correct function with the
USB button (21).
● To start playback, press the PLAY/PAUSE button (46) once.
● For extended instructions, read the paragraph "SD/MMC functions" further
on in this manual.
5.3

DVD/CD functions

After the disc has been loaded, a content menu will display on the TV screen.
● Press the arrow buttons (19) to select a menu item.
● Press ENTER to enter the selected menu item.
During playback, the following functions are available:
● To select a chapter (DVD) or track (CD), press the digit buttons (16).
● To select the next or previous chapter (DVD) or track (CD), press the
PREV button (42) or the NEXT button (43).
● To forward or rewind the DVD, press the FWD button (31) or the REV
button (32). The available speed rates are: 2x, 4x, 8x, 16x, 32x.
● To pause playback, press the PLAY/PAUSE button (46) once; to resume
playback, press the button again.
● To stop playback temporarily, press the STOP button (38) once. Press the
button again to stop playback permanently, or press the PLAY/PAUSE
button (46) to resume playback.
● To repeat a chapter (DVD) or one or all tracks (CD):
- Press the REPEAT button (37) once to repeat the current chapter or
track.
- Press the button once again (2x) to repeat the current title.
- Press the button once again (3x) to repeat all chapters or tracks.
- Press the button once again (4x) to cancel the function.
● To play the DVD frame by frame, press the STEP button (35).
Press the PLAY/PAUSE button (46) to resume normal playback.
● To view a specific title of a DVD, press the TITLE button (33).
Use the arrow buttons to select the title.
● To select the audio language of a DVD, press the AUDIO button (34)
repeatedly until the desired language is set.
● To switch on the subtitles of a DVD, press the SUBTITLE button (41).
Press the button again to switch off the subtitles.
● To select extra information of a DVD or CD (remaining time/passed
playtime/track number/chapter number), press the OSD button (44).
● To select the camera angle, press the ANGLE button (45).
AMD20
15