Operation; Master Power Switch; Quick Start - Akai AMD20 User Manual

Microset: radio / dvd-player with usb-port and cardreader

Hide thumbs Also See for AMD20:

Table of Contents

Operation

All functions of the appliance are accessible using the remote control.

All instructions refer to operation with the remote control, unless indicated

otherwise.

5.1

The appliance is equipped with a master power switch (14) located at the

back panel.

● Set the switch into the ON position prior to taking the appliance into

operation.

● Set the switch into the OFF position prior to disconnecting from the mains.

● The appliance is designed to be operated using the remote control.

For regular use you may find it convenient to switch the appliance to

standby mode after use. However, if you wish to care for the environment

and not waste energy by leaving the appliance in standby mode, you can

also switch off at the master power switch.

● When the appliance is not in use for longer period, we recommend to

switch the appliance off at the master power switch.

5.2

General functions

● Check that the master power (14) switch is in the ON position.

● To switch on the appliance, press the STANDBY button (15). To switch off

the appliance, press the STANDBY button (15) again.

● To select the source mode (DVD/TUNER/LINE), press the SOURCE

SELECT button (25).

● To select an extra signal source (USB/MEMORY CARD), press the USB

button (21). Press the button once again to exit this function.

● To adjust the volume, press the VOL + button or the VOL - button (18).

● To adjust the volume of each speaker separately, press the CH-LEVEL

button (23). Then press the VOL + button or the VOL - button (18).

AMD20

Table of Contents