Connecting Peripheral Equipment; Computer; Compatible Transceiver - Kenwood TS-570D, TS-570S Instruction Manual

CONNECTING PERIPHERAL EQUIPMENT

COMPUTER

1
The COM connector allows you to directly connect a computer or dumb terminal by using an RS-232C cable
terminated with a female 9-pin connector.
No external hardware interface is required between your computer and the transceiver. See "APPENDIX" on page 70
2
for information related to this connector.
3
4
5
6

COMPATIBLE TRANSCEIVER

When transferring data to or from another TS-570 or the TS-870S, directly connect the two transceivers using the COM
7
connectors.
When transferring data to other KENWOOD transceivers, use the optional IF-232C interface unit. Connect the
IF-232C to the ACC 1 connector located on the compatible transceiver. 6-pin DIN plugs (E07-0654-XX) are available
as options. Contact your dealer or a KENWOOD Service Center.
8
9
10
11
TS-570
12
13
14
15
16
60
RS-232C
serial port
Personal computer/
dumb terminal
TS-570
Cross-wired cable
DIN(6P)
Cross-wired cable
TS-570
COM connector
Straight cable
TS-570/870S
See IF-232C manual.
IF-232C
RS-232C(25P)
Straight cable
ACC 1
Rear panel view on
TS-450S/690S/850S/
950SDX
COM Connector
cable
TS-450S/690S/850S/950SDX
AN T
DIN(6P)
ACC 1
Pin
Pin Name
No.
1 GND
2
TXD
3 RXD
4
CTS
5 RTS
6
NC