Recalling Quick Memory; Temporary Frequency Changes; Quick Memory Vfo Transfer - Kenwood TS-570D, TS-570S Instruction Manual

Kenwood multi-bander ts-570d, hf transceiver ts-570d instruction manual
Hide thumbs Also See for TS-570D, TS-570S:
Table of Contents

Advertisement

RECALLING QUICK MEMORY

You can recall a Quick memory channel, only when
using VFO frequencies for both transmitting and
receiving.
1 Press QUICK MEMO [MR].
The current memory channel number appears.
If there is no data stored in any Quick memory
channel, then this step will not access Quick
memory.
2 Turn the MULTI/CH control to select a Quick
memory channel (1 to 5).
You cannot change memory channels while
transmitting.
3 To exit, press QUICK MEMO [MR] again.
Note: Memory channels cannot be changed while using the TF-SET
function.

TEMPORARY FREQUENCY CHANGES

After recalling a Quick memory channel, you can
temporarily change the data without overwriting the
contents of the channel. You can change the frequency
even when you select OFF in Menu No. 08.
1 Press QUICK MEMO [MR].
2 Turn the MULTI/CH control to select a Quick
memory channel (1 to 5).
3 Change the frequencies and associated data.
4 To store the changed data in Quick memory, press
QUICK MEMO [M.IN].
This action stores the new data in the current
channel and bumps the old frequency to the next
higher Quick memory channel.
5 To exit, press QUICK MEMO [MR] again.
Note: Memory channel data can also be changed while using the
TF-SET function.
QUICK MEMORY
VFO TRANSFER
This function copies the contents of the memory
channel that you recalled, to the VFO.
1 Recall a Quick memory channel.
2 Press [M>VFO].
Note: Pressing [M>VFO] after temporarily changing the recalled
data copies the new data to the VFO.
10 MEMORY FEATURES
45
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts-570sTs-570g

Table of Contents