Ringing Type (7-1-1-7); Tones On/Off (7-1-2 / 7-1-3 / 7-1-4) - Hughes HNS-7100 User Manual

Ringing type (7-1-1-7)

You can fine-tune the set ringing melodies
by means of the following options:
Ring Once
–
The specified melodies are played only
once when a call comes in.
Increasing
–
The specified melodies are played at the
lowest volume at first and keep on get-
ting louder each time they are repeated
until the maximum volume is reached.
Continuous
–
The specified melodies are played at the
set volume repeatedly until you answer
the call or mute it.
This is the standard setting.
Silent
–
The specified ringing melodies are
switched off. As a reminder you see the
( symbol in the status line.

Tones on/off (7-1-2 / 7-1-3 / 7-1-4)

You can switch alerting tones on or off.
The ringing tone may be switched off in the
Ringing
menu (see above). Earset alerting can
also be switched on and off in the
menu (see page 45).
}
Message tone (7-1-2)
When you receive a text message your mo-
bile phone emits a message tone.
Menu > Settings > Sound & Alert >
Select
Message Tone
The current setting is displayed
Change
Press
Save
Press
46
Beep Once
–
When a call comes in, you are alerted not
actually by a melody, but by a short single
beep.
To set the ringing type for the ringing melo-
dies:
Menu > Settings > Sound & Alert >
Select
Ringing > Ringing Type
The list of possible settings is
displayed
Change
Press
Scroll to the desired ringing type
Select
Press
}
Keypad tone (7-1-3)
This sets the tone off/on, you hear when you
press the mobile phone´s keys.
Ringing
Menu > Settings > Sound & Alert >
Select
Keypad Tone
The current setting is displayed
Change
Press
Save
Press
}
Warning tone (7-1-4)
The warning tone is sounding, when the
charger gets connected to the mobile phone.
Menu > Settings > Sound & Alert >
Select
Warning Tone
The current setting is displayed
Change
Press
Save
Press