Sms Messages; Writing An Sms (1-1) - Hughes HNS-7100 User Manual



SMS messages

You can receive and send short text messag-
es (SMS), each consisting of up to 160 char-
acters.
This is a network feature and requires a sub-
scription with the service provider.
Messages can be stored on the SIM card and
sent and received via GSM or SAT.

Writing an SMS (1-1)

To write an SMS, you have to open the SMS
editor:
Menu > Messages > Write Message
Select
The SMS editor is displayed
}
Editing tips
1. For instructions on how to use the keys
and move the cursor, see 'Character and
digit input in text editor mode' on page
58.
2. When you press a key, the characters
which can be typed with this key are dis-
played in the middle of the softkey line.
3. The 'count down' number in the status
line tells you how many characters you
can add to the message.
4. While entering lower case letters you see
. in the status line; while writing up-
per case letters, you see ,.
Prerequisite:
Store number of SMS center (7-8-1)
Before you can send or receive any messag-
es, you need to set the number of your mes-
sage center; you get this number from your
service provider:
Menu > Settings > SMS Parameter >
Select
SMS Center
Enter the number of the SMS center
Save
Press
Display while pressing a key:
E II .
Thank
|
jkl5
The current letter is displayed inverted in the
softkey line.
Display while no key is pressed:
E II .
Thank |
Options
}
Send a message
Options > Send
Select
Enter the number or press
number from the phonebook
Send
Press
Back
f
to select the
23