Manual Sat Registration (4-1) - Hughes HNS-7100 User Manual

}
Manual network selection (4-3)
With manual network selection, you can
select a service provider from a list of avail-
able ones.
To set manual network selection:
Menu > Network > Network Mode
Select
The current setting is displayed
Change
Press
Manual
Select
After a few seconds a list of service
providers for the active mode (GSM
or SAT) is displayed
Scroll to the desired service provider
Select
Press

Manual SAT registration (4-1)

You may find that you are no longer able to
receive SAT calls if your SAT registration is
out of date. This is indicated by the SAT icon
blinking or if the displayed service area ap-
pears to be incorrect. In this case you have to
update SAT registration manually to correct
this mismatch.
GSM Preferred
If is selected, the terminal
searches the list of GSM networks only. There
Search SAT
is the entry
GSM networks. Select
available SAT networks:
Search GSM
Scroll to
at the bottom of the provider list
Select
Press
After a pause, a list of service
providers for the alternative mode
(GSM or SAT) is displayed; SAT
search may take up to a few min-
utes
Scroll to the desired service provider
Select
Press
Note:
To use this function, your mobile phone has
to operate in SAT mode.
To send the signal for SAT registration:
Menu > Network > SAT Registration
Select
at the end of the found
Search SAT
to see the
Search SAT
respectively
43