Reading An Sms (1-2) - Hughes HNS-7100 User Manual

Reading an SMS (1-2)

When a new message has arrived, this is dis-
played together with the total number of
new messages, e.g.:
$
5 New Messages
List
If you don't want to see the reminder, you
can clear it by pressing
be reset for the next SMS messages to arrive.
Note:
In case you have missed a call, or a new cell
broadcast has arrived after the arrival of an
SMS, the missed call advise will replace the
message note.
The + symbol in the status line reminds you
that there are unread messages on your SIM
card. If the symbol on the status line is blink-
ing, your SIM memory for messages is full!
You should remove some old messages. If an
SMS could not be sent to your SIM card be-
cause of a lack of memory space, the SMS
center stores it until you have deleted some
old messages.
In order to read an SMS, you first have to en-
ter the SMS list and select the SMS to be
read.
Select a newly received SMS
To select a newly received SMS for read-
ing, you can enter the SMS list immediately:
List
Press
The SMS list is displayed
+ !
Back
!
. The counter will
Select an old or a saved SMS
Before you can read an SMS that has been
saved or read previously, you have to open
the SMS list as follows:
Menu > Messages > List Messages
Select
Statistics of the SMS list are dis-
played:
- Number of unread messages
- Total number of messages on SIM
- Free SIM space for messages
List
Press
The SMS list is displayed
}
SMS list
The SMS list contains all SMS messages you
have saved and received:
$
George
=
Steve
+
Draft
\
Read
SMS status
At the beginning of each entry in the list, a
symbol indicates the status of the SMS:
=
Read SMS
?
Unread SMS
\
Saved (draft) SMS
}
Display message text
Select the SMS to be read from the list
Read
Press
The message is displayed:
16:30
Maybe I'll be late 1
hour tonight, because
there's no ship at 6.
Options
!
$ #
Back
11.01.01
$ #
Back
25