Switch Location Track On/Off (8-3); Show Continuous Position (8-4) - Hughes HNS-7100 User Manual

}
Send way point as SMS
Menu > GPS Manager > Way Points
Select
Your way point list is displayed
Scroll to the desired way point
Options
Press
Send as SMS
Select
The SMS editor (see page 23) with
the way point name and the GPS
data is displayed
}
Send to PC
Menu > GPS Manager > Way Points
Select
Your way point list is displayed
Scroll to the desired way point
Options
Press
Send to PC
Select

Switch location track on/off (8-3)

To send the data from the mobile phone to a
PC you have to connect it via a data cable to
the PC whereby the NMEA 0183 V2.20 soft-
ware standard is used. The mobile phone can
only be connected to a PC serial port, not to
an NMEA port.

Show continuous position (8-4)

This function is similar to 'Display your cur-
rent position (8-1)', the difference being that
the displayed GPS data is constantly updated
at short intervals. This might be useful when
you are in motion, e.g. on the deck of a ship
or in an open car.
Options
By pressing you can use the currently
displayed data for the same features as pro-
Current Position
vided for (see page 50).
}
Edit way point name
Menu > GPS Manager > Way Points
Select
Your way point list is displayed
Scroll to the desired way point
Options
Press
Edit
Select
The GPS editor is displayed
Change the name of the way point (see
page 58)
Save
Press
}
Delete way point from list
When your way point list contains 10 entries
and you want to add a new way point, you
can delete entries instead of overwriting
them with a new ones:
Menu > GPS Manager > Way Points
Select
Your way point list is displayed
Scroll to the desired way point
Options
Press
Delete
Select
Delete
Press
To switch location track on or off:
Menu > GPS Manager > Location Track
Select
The current setting ('on' or 'off') is
displayed
Change
Press
Save
Press
Note:
Location Track is suspended during calls.
Menu > GPS Manager > Cont. Position
Select
The current latitude and longitude
data is displayed and updated
every few seconds
?
Press to display altitude data and
time/date
>
Press to display latitude and
longitude data again
51