Sound & Alert (7-1); Ringing Volume (7-1-1-8); Ringing Melody (7-1-1) - Hughes HNS-7100 User Manual


Sound & Alert (7-1)
You may choose from a variety of different
acoustic signals for ringing and alerting
tones.

Ringing volume (7-1-1-8)

If you want to set the ringing volume only,
you have to use the menu. You can select
from 6 volume levels.

Ringing melody (7-1-1)

You can select from a list of ringing melodies
to set different ringing melodies for
– incoming voice calls
– incoming faxes and data
– High Power Alerting
– alarms
– caller groups
When selecting a ringing melody as de-
scribed below, first the currently active melo-
dy and then the melody of the current list po-
sition is played.
44
Note:
Control of the loudspeaker volume and of the
ringing volume is described on page 10.
Menu > Settings > Sound & Alert >
Select
Ringing > Volume
The current level is displayed in a
bar chart:
$
Select
Scroll to the desired volume level
While adjusting the volume, the
ringing tone is played at the
particular level and the level is
shown in the display
Select
Press
}
Melody for incoming voice calls
(7-1-1-1)
You can set the general ringing melody for
all voice calls, except for caller groups you
have assigned to a special melody:
Menu > Settings > Sound & Alert >
Select
Ringing > Voice
The current setting is displayed
Change
Press
Select the melody from the list
Select
Press
!
$ #
Back