Fixed Dial (6-2) - Hughes HNS-7100 User Manual

Fixed Dial (6-2)

This function provides a second phonebook
on the SIM card for 'fixed dial'. If 'fixed dial'
is activated, only numbers from this list can
be dialled. It is possible to save partial num-
bers, for example area codes.
Example:
4 numbers are stored in the fixed list:
The number groups 0171, 0172, 0173 and
the unique number +4989892629.
So you are allowed to dial:
0171145875..., 017156471299 ... ,
0172565634..., 017295741642... ,
0173125862..., 017332567815... and
+4989892629 only.
If you dial a number which does not corre-
spond with the set of fixed dialling numbers,
an error message is displayed briefly.
}
Add fixed dialling numbers (6-2-3)
If the fixed dialling list is full, you have to de-
lete an entry (see page 34) before you can
add a new one.
Menu > Security > Fixed Dial >
Select
Add New
Enter PIN2
OK
Press
Enter number – or initial digit(s)
Save
Press
Enter name
Save
Press
}
Activate/deactivate fixed dialling
(6-2-2)
Menu > Security > Fixed Dial>On / Off
Select
Change
Press
Save
Press
Enter PIN2
OK
Press
Note:
If 'fixed dial' is activated, but the fixed dial list
is empty, no calls can be made!
34
}
Change fixed dialling number (6-2-1
You can change the number and/or name for
an entry in the fixed dialling list:
Menu > Security > Fixed Dial >
Select
Show List
Scroll to the entry to be changed
Options
Press
Edit
Select
Enter PIN2
OK
Press
Change the number
Next
Press
Change the name (see page 58)
Save
Press
Replace a fixed dialling number
In case you are about to add a fixed dialling
number to the list, but the memory of your
SIM card is full, you are alerted to this and
soon after you are advised by a message to
replace an existing entry.
To replace an existing entry in the list:
Scroll the list to the entry to be replaced
Replace
Press
If you don't want to replace an entry:
!
Press
The new entry will not be added to
the list
}
Delete fixed dialling number (6-2-1
Menu > Security > Fixed Dial >
Select
Show List
Scroll to the desired name/number
Options
Press
Delete
Select
Enter PIN2
OK
Press
Delete
Press
)
)