Transportation Notes; Printer Weights And Dimensions - IBM InfoPrint Color 100 Introduction And Planning Manual

3. In all other countries, contact your IBM representative for container return shipping instructions.
Table 5. Shipping Crate Specifications
Contents
Print tower 216 cm (84 in)
Paper supply 151 cm (59 in)
Cooling unit 72 cm (28.1 in)
Cover set 127 cm (49.5 in)
Supplies #1 175 cm (68.3 in)
Supplies #2 97 cm (38 in)
PES control unit 96 cm (37.5 in)
Jogger 96 cm (37.5 in)
Collator 165 cm (65 in)
RIP controller and 92 cm (36 in)
misc.
Install tools*
Note: These weights are approximations and are subject to change.
*The install tools crate dimensions and weight can vary by location. The tools and crate must be returned to IBM
when installation is complete.

Transportation Notes

Movers or riggers must be available during the printer installation to lift, move, and position crates and
machine components as needed by the service representative. All crates must be moved in the upright
position, as indicated on the crate.
Use forklifts or suitable pallet jacks capable of moving 1380 kg (3036 lb), the approximate weight of the
heaviest crate, to transport the crates to the installation site.
Movers will locate the print tower crate (the tallest crate), to the exact spot and orient it for installation.
During installation, the service representative will lift the printer from the pallet using special jacks, remove
the pallet, and lower the printer to the floor.
Select a path free from inclinations or thresholds for moving the crates from the unloading dock to the site.
Be sure that elevators are large enough and able to carry the combined weight of the print tower crates
1380 kg (3036 lb), plus the pallet jack and movers. On the entire path, the floor should be able to support
1380 kg (3036 lb), the weight of the heaviest crate, plus the pallet truck.
Movers or riggers will be required to remove the paper supply, jogger table, PES control unit, RIP
controller, collator, and cooling unit from the shipping pallets and then place each item at or near its
intended final location.

Printer Weights and Dimensions

Table 6. Printer Weight and Dimensions
Content
Paper Supply
Height Width
171 cm (67 in)
107 cm (42 in)
52 cm (20.3 in)
174 cm (68 in)
108 cm (42.2 in)
74 cm (29 in)
75 cm (29.3 in)
75 cm (29.3 in)
79 cm (31 in)
123 cm (48 in)
—
Height
120 cm 98 cm
(47.2 in) (38.6 in)
Depth
165 cm (64 in)
110 cm (43 in)
121 cm (47.2 in)
233 cm (91 in)
193 cm (75.3 in)
125 cm (49 in)
123 cm (48 in)
123 cm (48 in)
127 cm (50 in)
123 cm (48 in)
— —
Width Depth
100.4 cm
(39.5 in)
Chapter 2. Preparing the Physical Environment
Weight
1380 kg (3036 lb)
360 kg (794 lb)
124 kg (273.4 lb)
760 kg (1676 lb)
651 kg (1434 lb)
130 kg (286 lb)
105 kg (232 lb)
100 kg (221 lb)
114 kg (250 lb)
102 kg (225 lb)
—
Weight
285 kg
(627 lb)
21