Herc-U-Lift™ Caster Carton; Loose Parts; Assembly; Installing Handwheels - RIDGID TS3612 Owner's Manual

Herc-U-Lift™ Caster Carton
Item Description
A Channel Rear ................................. 1
B Tube U-Bolt 19-5/8" Long ................ 1
C Tube Support 17-1/4" Long ............. 1
D Plate Assembly ................................ 1

Loose Parts

Assembly

Installing Handwheels

1. From the bag labeled "Miscellaneous"
remove only the following hardware:
2 Pan Head Screws, 10 - 32 x 5/8" long
2 Lockwashers, #10 External Type
From among the loose parts find the fol-
lowing:
2 Handwheels
2. Line up flat spots on shaft and hand-
wheel, push handwheel onto shaft.
Install screw and lockwasher to lock
handwheel on shaft. Repeat for the
other handwheel.
A
D
G
Item G packed separately in
main table saw box
Qty. Item
E Tube Front 13-7/8" Long ................. 2
F Caster Swivel 3" .............................. 4
G Tube Rear 27" Long ........................ 2
H Bag Loose Parts.............................. 1
B
E
10-32 x 5/8
Pan Head Screw
Elevation
Handwheel
17
Description
C
F H
#10 External
Lockwasher
Handwheel
Lockwasher
Pan Head
Bevel
Handwheel
Qty.
Shaft
Screw