Herc-U-Lift™ Caster Carton; Loose Parts; Assembly; Installing Handwheels - RIDGID Contractor TS2424 Owner's Manual

Herc-U-Lift™ Caster Carton
Item Description
A Channel Rear ...................................................... 1
B Tube U-Bolt 19-5/8" Long..................................... 1
C Tube Support 17-1/4" Long .................................. 1
D Plate Assembly .................................................... 1

Loose Parts

A
D

Assembly

Installing Handwheels

1. From the bag labeled "Miscellaneous" remove only the
following hardware:
2 Pan Head Screws, 10 - 32 x 5/8" long
2 Lockwashers, #10 External Type
From among the loose parts find the following:
2 Handwheels
2. Line up flat spots on shaft and handwheel, push
handwheel onto shaft. Install screw and lockwasher to
lock handwheel on shaft. Repeat for the other hand-
wheel.
Qty. Item
E
F
G
H
B
E
G
Item G packed separately in
main table saw box
13
Description
Tube Front 13-7/8" Long .......................................2
Caster Swivel 3"....................................................4
Tube Rear 27" Long ..............................................2
Bag Loose Parts ...................................................1
C
F
10-32 x 5/8
#10 External
Pan Head Screw
Lockwasher
Elevation
Handwheel
Qty.
H
Handwheel
Shaft
Lockwasher
Pan Head
Bevel
Screw
Handwheel