Lubrication; Ridgid Recommends The Following Accessories - RIDGID TS3612 Owner's Manual

Lubrication

The saw motor bearings have been
packed at the factory with proper lubri-
cant. See motor label for lubrication
instructions. The following parts should be
oiled occasionally with SAE no. 20 or no.
30 engine oil.
1. Tilt screw threads and pivot nut. (First
clean with a solvent recommended for
gum and pitch removal.)
2. Elevation screw threads and pivot nuts.
(First clean with a solvent recom-
mended for gum and pitch removal).
3. Cradle bearing points.
4. Bearing points in blade guard and miter
gauge.
4

RIDGID Recommends the Following Accessories

Item
Miter Gauge ................................. AC1021
Miter Gauge Hold Down .............. AC1022
Molding/Dado Insert for 7 In. Dia.
Molding or Dado Head................. AC1025
Molding/Dado Insert for 8" ........... AC1030
Dust Collector .............................. AC1098
Zero Clearance Insert .................. AC1035
4
SKU No. Do not use any accessory unless you
have received and read complete instruc-
tions for its use.
WARNING: Use only accesso-
ries recommended for this saw.
Using other accessories may be
dangerous.
68
2
3
3
4
3 1