Icmpsettings; Ipsectunnelsettings - D-Link DFL-260E Reference Manual

3.55.8. ICMPSettings

General settings for Hardware Monitoring
Properties
EnableSensors
SensorPollInterval
MemoryPollInterval
MemoryUsePercent
MemoryLogRepetition
MemoryAlertLevel
MemoryCriticalLevel
MemoryWarningLevel
3.55.8. ICMPSettings
Description
Settings related to the ICMP protocol.
Properties
ICMPSendPerSecLimit
SilentlyDropStateICMPErrors

3.55.9. IPsecTunnelSettings

Description
Enable/disable all HWM functionality. (Default: No)
Sensor polling interval. (Default: 500)
Memory polling interval in minutes. (Default: 15)
Should mem monitor use percentage as unit for monitoring, else it
is megabyte. (Default: Yes)
Should a log message be sent for each poll result that is in the Alert,
Critical or Warning level, or should a log message only be sent
when a new level is reached. (Default: No)
Alert log message if free memory is below this value, disable by us-
ing 0. (Default: 0)
Critical log message if free memory is below this value, disable by
using 0. (Default: 0)
Warning log message if free memory is below this value, disable by
using 0. (Default: 0)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Maximum number of ICMP responses that will be sent each
second. (Default: 500)
Silently drop ICMP errors regarding statefully tracked open
connections. (Default: Yes)
186
Chapter 3. Configuration Reference