Systxbbecw01- - A Model (Only) - Bryant Evolution Connex SYSTXBBECW01-A Installation Instructions Manual

After the control has connected to the network, go to
S
www.MyEvolutionConnex.Bryant.com to register the unit and begin remote
access. This requires the MAC address and serial number of the Evolution
Connext Wall Control. To find the serial number and MAC address of the
®
Evolution Connext Wall Control, click on Menu, Down Arrow, Wireless and
View MyEvolution Info. This screen will provide the information needed on
the MyEvolution website during registration.
When the connection to the MyEvolution web server has been established, the
S
status screen will show Connected for both Wi- - Fi and the server.
Connected:
7.2 SYSTXBBECW01- - A Models (only)
To establish the Wi- - Fi connectivity to the Evolution Connex Control through the
Evolution System Wireless Access Point (TP- - LINKR Device), connect the WAN
(BLUE port) connection of TP- - LINK Wireless Access Point to the home's existing
router LAN port using the provided Ethernet cable. The LAN ports on the back of
the TP- - LINK Wireless Access Point should not be used for other devices. The
Evolution (TP- - LINK) Wireless Access Point should only be used for connection of
the Evolution Connex Control(s) and is not intended to be used wired or wirelessly
with any other devices.
Not Connected:
74
®
A13239