Utility Event Setup - Bryant Evolution Connex SYSTXBBECW01-A Installation Instructions Manual

The PC/MAC software application to format the dealer logo and contact
information can be found at:
www.MyEvolutionConnex.Bryant.com/Evolution/downloads
Download the program and follow the program instructions.
Once the dealer logo and contact information have been properly loaded onto the
USB memory device, insert the USB device into the bottom edge of the Evolutionr
Connex Control. The control will prompt you whether or not to upload the dealer
logo. Once complete, you will receive a confirmation that your upload was
successful. If the information was not stored properly on the USB device, you will
receive an error message that the dealer logo was not found. Refer back to the
PC/MAC software application instructions and try again. Once the upload is
complete, touch NEXT.
If you have problems, contact your distributor service manager for support.
6.9.

Utility Event Setup

The utility event setup is used to enable utility events if the home owner is
participating in a utility event program. Selecting on will enable the utility event
icon on the main menu.
69
A12205