Searching Sam Module (If Applicable); Searching For Zones (If Applicable) - Bryant Evolution Connex SYSTXBBECW01-A Installation Instructions Manual

5.5. Searching for SAM Module (If Applicable)
"Searching for SAM Module" will appear on the screen to determine if a System
Access Module, used for home automation only, is connected to the system.
The SYSTXBBSAM01 is not compatible with this control. The compatible modules
are SYSTXBBRCT01 and SYSTXBBRWF01. The SAM is used for home
automation purposes. The Evolution Connex control must have at least Version 8 or
newer to be compatible with the SAM.
NOTE: For more information regarding the SAM Module, reference the latest
version of the application specification entitled "Carrier Communicating HVAC
System" (Version 2 or later), available on HVACpartners.com, or the System
Access Module Installation Instructions.
5.6.

Searching for Zones (If Applicable)

This function is not available with the 986T furnace.
"Zoning - - Searching" will appear on the screen to determine if any zones are
present. The screen will show Zone 1, Zone 2, etc. and indicate all zones having
either a Remote Room Sensor, or smart sensors associated with them. If the system
contains smart sensors, they must be assigned a zone number before continuing.
See the Smart Sensor Installation Instructions on how to assign Smart Sensors to
their respective zones. After each zone has been identified, touch NEXT.
20
A13117