Electric Heat; Furnace - Bryant Evolution Connex SYSTXBBECW01-A Installation Instructions Manual

6.4.1.

Electric Heat

If you have a fan coil with electric heaters, this menu item will allow the heaters to
be exercised. With self- - identifying electric heaters, three stages of electric heat are
available to be exercised in any combination. Non- - identifying heaters will only
provide one stage of heat. After the selections are made, touch START.
Low Heat: Selectable from 0 to 120 minutes
S
Default = 5 minutes
d
Medium Heat: Selectable from 0 to 120 minutes
S
Default = 5 minutes
d
High Heat: Selectable from 0 to 120 minutes
S
Default = 5 minutes
d
6.4.2.

Furnace

Make sure the furnace is properly installed.
This option allows the furnace to be exercised. First, a low heat run time and high
heat run time are selected. The furnace will execute its ignition start- - up sequence.
This sequence will be displayed on the screen. After the gas valve and blower
51
A13122