Goodman GMV95 Technical Information Manual page 9

PRODUCT DESIGN
Coil Matches:
A large array of Amana
applications. These coils are available in both cased and uncased models, with or without a TXV expansion
device. These 95%+ furnaces match up with the existing Amana
Coil Matches (for Goodman
C A
Product Type
C: Indoor Coil
Application
A: Upflow/Downflow Coil
H: Horizontal A Coil
S: Horizontal Slab Coil
• All CAPF coils in B, C, & D widths have insulated blank off plates for use with one size smaller furnaces.
• All CAPF coils have a CAUF equivalent.
• All CHPF coils in B, C & D heights have an insulated Z bracket for use with one size smaller furnace.
• All proper coil combinations are subject to being ARI rated with a matched outdoor unit.
® brand coils are available for use with the GMV95 furnaces, in either upflow or horizontal
®
units using R22 and R-410A):
P F
Expansion Device
F: Flowrator
Cabinet Finish
U: Uncased
P: Painted
C: Unpainted Case
Nominal Capacity Range @ 13 SEER
1824: 1 1/2 to 2 Tons
3030: 2 1/2 Tons
3642: 3 to 3 1/2 Tons
®
brand coils as shown in the chart below.
1824 A
Nominal Width for Gas Furnace
A: Fits 14" Furnace Cabinet
B: Fits 17 1/2" Furnace Cabinet
C: Fits 21" Furnace Cabinet
D: Fits 24 1/2" Furnace Cabinet
N: Does Not Apply (horizontal slab only)
6 A
Revision
A: Revision
Refrigerant
6: R-22 or R-410A
2: R-22
4: R-410A
9