Goodman GMV95 Technical Information Manual page 10

PRODUCT DESIGN
Thermostats:
The following Amana ® brand thermostats are suggested for use with GMV95 Furnace Models:
Thermostat
1213406*
1213407
1213411
*1213406 is the recommended model f or the GMV 95 f urnaces w hen used w ith a heat pump in a f ossil f uel
application. It is NOT f or use w ith the GMV 95 as a sole heating source. 1213406 thermostats are 24V
pow ered w ith battery backup.
Filters:
Filters are required with this furnace and must be provided by the installer. The filters used must comply with UL900 or
CAN/ULCS111 standards. Installing this furnace without filters will void the unit warranty
This furnace has provisions for the installation of return air filters at the side and/or bottom return. The furnace will
accommodate the following filter sizes depending on cabinet size:
Cabinet
Width
(in.)
All
Refer to Minimum Filter Area tables to determine filter area requirement. NOTE: Filters can also be installed elsewhere in
the duct system such as a central return.
COOLING AIRFLOW REQUIREMENT (CFM)
600 800
0453__X* 376* 384
0704__X* --- ---
0905__X* --- ---
1155__X* --- ---
*Minimum filter area dictated by heating airflow require-
Disposable Minimum Filter Area (in
[Based on a 300 ft/min filter face velocity]
10
THERMOSTATS
Man/Auto Program mable
Man. Or Auto
Man. Changeover
Man. Changeover
Side Return(s)
Approx.
Nominal
Flow Area
Filter Size
(in.)
(in
16 x 25 x 1 400
UPFLOW
1000 1200 1400 1600
480 576 --- ---
564* 564* 672 768
--- 752* 752* 768
--- 940* 940* 940*
ment.
Cool Heat Batt. Pow ered Batt. Bkup
Yes 2
Yes 2
No 2
Upflow Filters
Bottom Return
Cabinet
Width
2
(in.)
)
17-1/2
21
24-1/2
2000
0453__X*
---
0704__X*
0905__X*
960
1155__X*
960
*Minimum filter area dictated by heating airflow require-
2 ) Permanent Minimum Filter Area (in
[Based on 600 ft/min filter face velocity]
3 No
2 Yes Yes
2 Yes
Approx.
Nominal
Flow Area
Filter Size
2
(in.)
(in )
14 x 25 x 1 350
16 x 25 x 1 400
20 x 25 x 1 500
UPFLOW
COOLING AIRFLOW REQUIREMENT (CFM)
600 800 1000 1200
376* 384 480 576
--- --- 627* 627*
--- --- --- 836*
--- --- --- 940*
ment.
No
No
1400 1600 2000
--- --- ---
672 768 ---
836* 836* 960
940* 940* 960
2 )