Ospfarea - D-Link NetDefend DFL-210 Cli Reference Manual

3.38.1. OSPFArea

DebugRoute
AuthType
AuthPassphrase
AuthMD5ID
AuthMD5Key
LogEnabled
LogSeverity
Comments
3.38.1. OSPFArea
Description
An OSPF area is a sub-domain within the OSPF process which collects OSPF interfaces, neighbors,
aggregates and virtual links.
Properties
Name
AreaID
Stub
StubSummarize
StubMetric
FilterExternal
FilterInterArea
Comments
3.38.1.1. OSPFInterface
Description
Select and define the properties of an interface that should be made a member of the Router Process.
cifies the details of the log. (Default: Off)
Enables or disabled logging of routing table manipulation events and
also specifies the details of the log. (Default: Off)
Specifies the authentication type for the OSPF protocol exchanges.
(Default: None)
Specifies the passphrase used for authentication. (Optional)
Specifies the MD5 key ID used for MD5 digest authentication.
A 128-bit key used to produce the MD5 digest. (Optional)
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the specified log
receivers. (Default: Default)
Text describing the current object. (Optional)
Specifies a symbolic name for the area. (Identifier)
Specifies the area id, if 0.0.0.0 is specified this is the backbone area.
Enable to make the router automatically advertises a default route so that
routers in the stub area can reach destinations outside the area. (Default:
No)
Become a default router for stub area (Summarize). (Default: Yes)
Route metric for stub area. (Optional)
Specifies the network addresses allowed to be imported into this area
from external routing sources. (Optional)
Specifies the network addresses allowed to be imported from other
routers inside the area. (Optional)
Text describing the current object. (Optional)
143
Chapter 3. Configuration Reference