Specifications - Icom iC-A210E Instruction Manual

8

SPECIFICATIONS

D General
• Frequency range
• Channel spacing
• Frequency stability
• Operating temperature
• Antenna impedance
• Number of memory channels : 10 memory channels
• Mode
• Power supply requirement : 13.80 V / 27.50 V DC
(negative ground)
• Dimensions
(projections not incl.)
• Weight
D Transmitter
• Mode
• Output power
• Spurious emissions
• Microphone impedance
• Modulation limiting
• Transmitter intermittent : 1 minute (Transmitter ON)
duty cycle
28
: 118.000 to 136.975 MHz
: 25 kHz or 8.33 kHz
: ±1 ppm (0˚C to +40˚C)
: –20˚C to +55˚C
: 50 Ω
200 group channels
10 history channels
10 GPS channels
: AM (6K00A3E)
: 160 (W)✕34 (H)✕271 (D) mm
: approx 1.0 kg
: A3E
: 6 W (Carrier power)
: –36 dBm (harmonics)
: 600 Ω
: 85% (Max 98%)
3 minutes (Transmitter OFF)
D Receiver
• Receive system
• Intermediate frequencies
•Sensitivity
• Selectivity
• Spurious response rejc.
• Audio output power
All stated specifications are subject to change without notice or
obligation.
: Double conversion
superheterodyne
: 1st 38.85 MHz
2nd 450 kHz
: (AM) Less than 2 µV (pd)
at 6 dB S/N
: • Channle spacing: 25 kHz
6 dB ±8.5 kHz
• Channel spacing: 8.33 kHz
6 dB ±2.8 kHz
: More than 74 dBµ
: 5 W with a 4 Ω load (External
speaker)
60 mW with a 500 Ω load
(Headphone)