Memory Channel; I Group Memory Channel; Regular Memory Channel - Icom iC-A210E Instruction Manual

I Regular memory channel
The transceiver has 10 regular memory channels. 5 actions
are selectable.
q Push [RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the regular memory channel.
• "MEMORY" appears.
RX
122.00
e Rotate [DIAL] to select the desired channel.
r Push [MEM], then rotate [O-DIAL] to select a menu as fol-
low.
• The memory channel number blinks.
REPLACE Replace to the standby frequency.
DELETE Delete the memory channel.
REVIVE Revive the previous memory channel data.
CH NAME Edit the memory channel name.
DONE Do nothing and return to the memory mode.
t Push [MEM] to perform the selected action.
MEMORY
127.00
5
CH01
MEMORY OPERATION

I Group memory channel

The transceiver has 200 memory channels 200 group
channels (10 channels × 20 groups). 6 actions are selectable.
q Push [RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the group memory channel.
• "GRP01–GRP20" appears.
RX
122.00
e Push [DIAL], and then rotate [O-DIAL] to select the mem-
ory group from GRP01 to GRP20 if necessary.
• The group and channel numbers blink.
• Push [DIAL] again, or push [RCL] to set the memory group.
r Rotate [DIAL] to select the desired channel.
t Push [MEM], rotate [O-DIAL] to select a menu as follow.
• The memory channel number blinks.
REPLACE Replace to the standby frequency.
DELETE Delete the memory channel.
REVIVE Revive the previous memory channel data.
GRP NAME Edit the group name.
CH TAG Set the memory channel as a tag channel.
DONE Do nothing and return to the memory mode.
y Push [MEM] to perform the selected action.
GRP01
127.00
5
CH01
3
03
13