Igps Memory; Igps Memory Edit; I Memory Protection - Icom iC-A210E Instruction Manual

I GPS memory
When connected to an external GPS receiver* equipped with
an airport frequency database, frequency data such as
nearby airports can be transferred and made available in the
GPS memory (maximum 10-memory channels).
*Ask your dealer for available GPS receiver details.
NOTE:
See the GPS receiver's instruction manual when
transferring the frequency data in details.
q Push [RCL] to enter the memory mode.
• The channel number appears.
w Rotate [O-DIAL] to select the GPS memory channel.
• "GPS" appears.
e Rotate [DIAL] to select the desired channel.
r Push [RCL] to exit the GPS memory mode.
Airport code
RX
122.00
Tag name
GPS RJTJ
122.05
5
CH01 TWR
MEMORY OPERATION
I GPS memory edit
The received GPS memory data is stored to desired group
memory channel.
NOTE:
The GPS memory data is overwritten if the setting
group memory channel has already memorized other data.
q Push [RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the GPS memory channel.
• "GPS" appears.
e Push [MEM] to enter the GPS memory channel edit mode,
then rotate [O-DIAL] to select the desired group memory.
• "GPS" and airport code blink.
r Push [MEM] to store the GPS memory channel data to the
selected group memory.
t Push [RCL] to exit the memory mode.

I Memory protection

The transceiver has memory protection which inhibits to the
editing (storing, deleting, replacing, etc.) of the memory group
memory channels.
Refer to "Memory Protection" (p. 22) for details.
3
03
17