Install The Power Cord; Setting The Lcd Contrast - Brother DCP-9042CDN Quick Setup Manual

2
While pressing the green paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the machine.
4
1
(1)
2
3
5
You can change the contrast to help the LCD look
lighter or darker.
1
2
3
4
5
Setting Up the Machine

Install the power cord

Make sure that the machine's power switch is
off. Remove the label covering the AC power
inlet.
Connect the AC power cord to the machine.
Plug the AC power cord into an AC outlet. Turn
the power switch on.

Setting the LCD contrast

Press Menu.
Press 1.
Press 6.
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
Press Stop/Exit.
7