Release The Scanner Lock; Install The Power Cord And Phone Line - Brother 9840CDW - Color Laser - All-in-One Quick Setup Manual

STEP 1
Setting Up the Machine
2
While pressing the green paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the machine.
6
4
1
(1)
5
1
2
3

Release the Scanner Lock

Push the lever (1) in the direction to unlock the
scanner.
(The gray scanner lock lever is located at the
back left side, under the docment cover (2) )
(1)
Install the power cord and
phone line
Make sure that the machine power switch is off.
Remove the label covering the AC power inlet.
Connect the AC power cord to the machine.
Plug the AC power cord into an AC outlet. Turn
the power switch on.
(2)