Release The Scanner Lock; Install The Power Cord And Phone Line - Brother MFC-8460N Quick Setup Manual

Step 1
Release the Scanner
3
Lock
1
Push the lever (1) up to unlock the scanner.
(The gray scanner lock lever is located at
the back left side, under the document cover
(2).)
Damage caused to your machine by
failure to lock the scanner before
packing and shipping may void your
warranty.
6
Setting Up the machine
(1)
Install the Power Cord
4
and Phone Line
1
Make sure that the power switch is off.
(2)
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
If
Scanner Locked
immediately release the scanner lock and
press Stop/Exit.
3
Connect one end of the telephone line cord
to the socket on the machine marked LINE
and the other end to a modular wall socket.
Do not connect the Parallel or USB
cable yet.
appears on the LCD,